breaking load

英 [ˈbreɪkɪŋ ləʊd] 美 [ˈbreɪkɪŋ loʊd]

断裂负载,破坏载荷,破断载荷,拉力

化学



双语例句

  1. If you feel like your back is breaking from the weight your mind is carrying, perhaps its time to lighten the load you carry.
    如果你觉得后背快支持不住自己的大脑了,那是时候减轻一下自己的压力重担了。
  2. Used for testing indexes of polyurethane monofilament, such as breaking tenacity, elongation at break, load at specified elongation, relaxation of stress, plastic deformation, etc.
    用于测定氨纶丝断裂强度、裂伸长率、伸长负荷、力松驰、性变形等性能指标。
  3. Enhance the connecting and breaking capability, and fine moving and thermal stability, suitable for frequent operation, It is the new generation instead of FB-6 HV load switch.
    提高了接通和分断能力,动热稳定性好,适于频繁操作,是FB-6高压负荷开关的更新换代产品。
  4. Depth of Solder Penetration drastically affects the breaking load of the joint.
    是影响连接部分断裂负载能力的最主要因素。
  5. Breaking and closing ring closure current of load switch, charging current of non-load transformer and cable, composite apparatus can break till any current of rated short circuit current.
    负荷开磁分合仙、闭环电流、空载变压器和电缆充电电流,组合电器可以开断直至额定短路电流的任何电流。
  6. Used for testing indexes of single fiber, such as breaking tenacity, elongation at break, load at specified elongation, elongation at specified load, creep, etc.
    用于测定各种单根纤维的断裂强力、断裂伸长率、定伸长负荷、定负荷伸长、蠕变等性能指标。
  7. The impact of humidity and tearing on the breaking load of gypsum plasterboard
    湿度和撕裂情况对纸面石膏板断裂荷载的影响
  8. Parallel laid, with a large metallic cross-section, high breaking load relative to the rope diameter.
    线接触结构,金属面积比较高,具有较高的破断载荷。
  9. The polychlorotrifluoroetlylene oil index matching fluids were studied and their performances, such as refractive index, absorption, isolation, breaking load and stability measured.
    研究了氟氯系列折射率匹配液,测量并考核了其各项性能。
  10. The operation of heavy haul trains will improve the efficiency of arriving breaking up system of marshaling yards, lower the load of humps, shorten the duration of waiting for breaking up, enhance the capacity of receiving dispatching sidings and reduce the receiving delaying possibility.
    开行重载列车可以使沿线编组站到解系统作业效率提高,驼峰负荷降低,车列待解时间缩短,到发线通过能力提高,接车延误率变小。
  11. The delayed elastic deformation stage came later, the bend deflection increased more quickly, and breaking life shortened with the increase of the prolongation of the maximum load hold time.
    随着最大载荷保持时间的增加,塑木复合材料进入延迟弹性变形阶段越晚,弯曲挠度增加越快,断裂寿命降低。
  12. The prominent advantage of the approach is that it can correctly distinguish rotor bar breaking and load oscillation.
    它的最大优点在于可以正确区分转子断条故障与负荷波动,这就大幅提高了转子断条在线检测的可靠性。
  13. The cause which result in breaking off gear teeth and vanes touching wall on high load are analyzed, according to the stress status of gear and axle in Root's blower.
    根据罗茨风机齿轮、轴受力情况,分析高负荷下风机齿轮轮齿折断及叶轮擦墙板的原因。
  14. In this paper, the breaking transient formulas of terminal voltage and field current of synchronous machine with three phase symmetric load have been derived.
    本文导出了同步电机三相对称负载突然拉开,电机端电压与励磁电流在瞬态过程中的解析表达式。
  15. This article analyses various factors and concludes the following breaking reasons: 1. not enough consideration of the whole system so that the less load had been evaluated, 2. higher permissible stress had been sellected;
    粘胶纤维成形时丝条断头原因浅析本文分析了各方面的因素,归纳出断裂原因:①对整个体系认识不够,导致对载荷估计偏低,②对许用应力选用偏高;
  16. Mechanical model test and two dimensional photoelastic stress analysis were done to determine the breaking load and the stress distribution in preparations with centric and eccentric occlusions.
    设计牙力学模型和二维光弹模型实验,对不同咬合状态下几种预备体的受力进行分析对比。
  17. According to the purpose and characteristic of the weakening blast of hard top-coal in fully mechanized caving faces, that the dynamic breaking process of hard coal mass on blasting load is also a process to accumulate continuously damage is pointed out;
    根据综放开采坚硬顶煤预先弱化爆破作用的目的和特点,认为在爆炸载荷作用下坚硬煤体的动态断裂破坏也是一个连续损伤演化积累过程。
  18. Effects of Sr 2+ on body weight, body length, AKP activity of serum, calcium content of urine and breaking load of bended femur for rats were not found.
    尚未发现锶对动物体重、体长、血清AKP活性、尿钙水平以及股骨弯曲断裂载荷的影响。
  19. The Transient Mathematical Model of Synchronous Machine in Suddenly Breaking with Three Phase Symmetric Load
    同步电机三相对称负载突然拉开瞬态过程的数学模型
  20. The endurance limit of the high strength link plates of 1 ( 1/ 2 ″) oil field roller chains manufactured in China using the above parameters has reached 31% of the rated breaking load of the roller chains.
    采用该参数试制的1(1/2)时高强度石油滚子链的疲劳极限已达到滚子链额定破断负荷的31%。
  21. Effects of resin content on properties of aramid fiber reinforced composites are researched, such as breaking load of impregnated F 12 fiber roving, developed fiber stress and vessel performance factor ( pV/ W c).
    研究了树脂含量对芳纶纤维/环氧复合材料的性能的影响,主要是浸胶纤维强度、压力容器中纤维强度的发挥系数、容器特性系数pV/Wc。
  22. The results indicated that the breaking load and overhand knot strength of twine bear a regression relation to cosine of twist angle ( cos β).
    经分析可见,网线的断裂强力、单线结强力均与捻回角的余弦呈回归关系。
  23. The minimum breaking load of steel wire strands is investigated by experiments in this paper.
    通过大量的试验数据,对我国现在生产的钢绞线的最小断裂载荷进行讨论。
  24. To explore not only the methods but also the shortcomings of breaking out the two electromagnetic loop networkers of load centre and power sources.
    探讨负荷中心和电源中心两种电磁环网的打开方法;同时也分析打开电磁环网后,带来的缺陷。
  25. Based on the theory of uniform corrosion expansion, the method for calculating the force when the crack come through the protective layer was established. A FEM software FINAL is used to establish model to simulate the progress of breaking down though adding load step by step.
    针对钢筋均匀锈蚀的情况,选择保护层裂缝贯通时锈胀力的计算方法,运用有限元分析软件FIANL建立分析模型,通过分步加载的方式对模型的破坏过程进行了仿真计算。
  26. The working surroundings of multi-functional breaking and fire-fighting truck are atrocious, and the load is more complex than general construction machines.
    多功能破拆消防车工作环境恶劣,与一般的工程机械相比载荷更为复杂。
  27. Once the belt breaking accident occurs, hundreds or even over one thousand metres of conveyor belt together with its load of materials will slide down to the tail of belt conveyor on the role of gravity, damaging the rack, blocking roadways, and even causing casualties.
    断带事故一旦发生,几百甚至上千米长的输送带连同其上承载的物料在重力的作用下滑向机尾,损坏机架,阻塞巷道,甚至造成人员伤亡,后果非常严重。